Quick release pin
Quick release pins and nylon cables are
secured to vertical supports using rivets and
to the diagonal braces using screws. Use steps
1, 2, and 4 to remove quick release pins and
nylon cables from vertical supports and steps
1, 3, and 4 to remove them from the
1. Center punch rivet (1) securing nylon cable (2)
to PE vertical support (3).
2. Use a 3/16 inch twist drill bit to drill out
3. Remove screw (4) securing nylon cable (2) to
PE diagonal brace (5).
4. Remove quick release pin (6), and cut nylon
cable (2) from quick release pin (6).