Complete the installation of this check valve before proceeding with the inspection of the next
Press O-ring (8) with fingers into the groove of the check valve body (7). Insert the O-ring (10) into the
check valve cavity of the pump body (11). Position check valve (9) in the check valve body (7). Thread the
check valve body (7) with T-fitting (6) attached into the pump body (11), tighten and orient as illustrated..
Install elbow fitting (3) and tighten flare nuts. Tighten the bolts of the bracket assembly (5 and 6), if
Install tubing (1) and tighten the flare fittings.
GO TO NEXT PAGE