TM 1-1740-204-13&P
3-14. ACCESSORY INSPECTION
Personnel Required:
67 Series
Material/parts:
High Pressure Hose
Tire Filling Hose
Equipment Condition:
Disconnect hoses from the cart
3-14.1. HIGH PRESSURE HOSE
a.
Inspect the rubber hose sections (1) and (2) of the high pressure hose for nicks, cuts and abrasions. Examine
the crimps at the hose ends.
b.
Inspect high pressure fitting (3) and inflating chuck (4) for bent, distorted parts or deformed screw threads.
c.
Inspect the washer (5) in the inflating chuck (4) for wear and nicks.
CAUTION
DO NOT force-tighten control valves; damage will occur to the soft needle seat of the valve.
d.
Inspect high pressure shutoff valve (6) for smooth operation and freedom from corrosion.
GO TO NEXT PAGE
3-9