9 JAN 84
(Supersedes LO 5-3825-209-12, 13 DECEMBER 1968)
SWEEPER, ROTARY, TOWED; GASOLINE DRIVEN,
8 FT LG, 30-INCH DIA ADJUSTABLE BRUSH
(MARS INDUSTRIES MODELS) (MODEL MP38-W)
Reference: TM 5-3825-209-14 and FEDERAL SUPPLY CATALOG C9100-IL.
Hard time intervals and the related manhour times are
Clean parts or fittings with dry cleaning solvent (SD),
based on normal operation.
The man-hour time
Type II or equivalent. Dry before lubricating. Dotted
specified is the time you need to do all the services
arrow shafts indicate lubrication on both sides of
prescribed for a particular interval. Change the hard time
equipment. A dotted circle indicates a drain below.
interval if your lubricants are contaminated or if you are
Relubricate all items found contaminated after fording or
operating the equipment under adverse operating
conditions, including longer than-usual operating hours.
The hard time interval may be extended during periods
The lowest level of maintenance authorized to lubricate a
of low activity. If extended, adequate preservation
point is indicated by one of the following symbols as
precautions must be taken.
appropriate: Operator/Crew (C); and Organizational
Reporting errors and recommending improvements.
Dry cleaning fluid is flammable. Do not use near a flame
You can help improve this manual. If you find any
or excessive heat. Use only with adequate ventilation.
mistakes, or if you know of a way to improve the
Avoid prolonged breathing of vapors and minimize skin
procedures, please let us know. Mail your letter or DA
Form 2028 (Recommended Changes to Publications and
Blank Forms) direct to: Commander, US Army Tank-
Automotive Command, ATTN: DRSTA-MB, Warren, Ml
48090. A reply will be furnished to you.
*The time specified is the time required to perform all services
at the particular interval.
CARD 1 OF 4